
Subject to changes due to technical improvements ESS Energie Systeme & Service GmbH
CHP accessory range – 01/2010 13
5368 463
2.3 Installation
2.3.1 Silencer hood and temperature-dependent fan
Article number CHP module type ESS Viessmann
EM-199/263, EM-199/293, BM-190/238, EM-238/363 710-00-0080 7439292
EM-363/498, EM-401/549, BM-366/437 710-00-0081 7439293
Function If installed in areas where noise emissions are critical, the CHP module can be equipped with a ventilated
silencer hood, consisting of the silencer hood for the engine generator unit and the casing of the heat
exchanger unit.
Version • Sound insulation elements made of sheet steel, lined with combination elements made from bitumen
board and highly absorbent exible foam with additional surface coating; area in contact with hot parts
lined with compound foam (300 kg/m
3
) with additional aluminium lining.
• The 25 μm thin coating is largely resistant to petrol and motor oil splashes and easy to clean.
• The surface coating protects against mechanical damage and has outstanding ageing resistance.
• Fire characteristics in accordance with FMVSS 302 and DIN 75200.
• In the hot area, the insulation is made of mineral wool/glass bre and a perforated plate cover.
• The silencer hood elements can be removed for maintenance.
• The support structure can be removed for modication work, in order to be able to work with lifting
gear without hindrance.
• Fresh air inlet through louvres integrated into the side silencer hood casing. Combustion air inlet
through separate air inlet on the roof casing.
• 1 runtime-controlled extract fan.
• In addition, 1 temperature-dependent extract fan to supply the CHP module with sufcient combustion
air and cooling air at max. 500 Pa pressure for extract air duct.
• Average sound insulation of the hood approx. 20 dB.
• Flexible canvas ange to connect the downstream duct.
Delivery As loose accessories or mounted on the CHP module
Transport and installation 2
Comentários a estes Manuais